Format Western Digital Hard Drive To Fat32

If you need to format a USB flash drive, HDD, SDD, or some other form of storage to FAT32, you've come to the right place.

1. Format To Fat32
2. How To Format A Drive To Fat32
3. Format Flash Drive To Fat32

In this article we'll go over what a file system is, the FAT32 standard, and several ways to format a storage device to FAT32 on Windows 10.

What's a file system?

Air display windows 7 64 bit. A file system is a standardized way of organizing data on a computer storage device like a flash drive or HDD.

Download WD FAT32 Formatter - Format Western Digital USB drives or WireFire hard disk drives to bring them to factory configurations as well as restore WD disk icon files. Method 1 Click Start, point to Programs, point to Accessories, point to System Tools, click Drive Converter (FAT32), and then click Next. In the Drives box, click the drive you want to convert to the FAT32 file system. Click Next, and then click OK.

Connect the Western Digital hard drive to your Windows computer using a cable. Click Control Panel - System and System - Administrative Tools - Computer Management - Disk Management. Right-click the Western Digital hard drive and then select the Format option. In this video I show how to format a 4TB hard drive to a FAT32 format so you don't have to spilt partitions anymore too allow both Wii and GameCube games to. In Windows 10, it is difficult to format a flash drive into FAT32 if its memory size is more than 32 GB. This is due to its longevity as a file system. And since this article exists, formatting a 64 GB SD card to FAT32 in Windows 10 still possible, and here it will be described in detail how to do it.

A file system divides a storage device into virtual compartments, almost like a wall of post office boxes, and keeps track of all the information that gets stored in each box.

Some of the most common file system formats for portable storage devices are FAT32, NTFS, and ExFAT.

FAT32 compared to other formats

Of those three common formats, FAT32 is the oldest and most widely supported. Every major operating system will allow you to read and write from a USB flash drive that's formatted to FAT32.

Meanwhile, macOS can only read NTFS drives, and you would need to install third-party software to write back to the drive.

However, though FAT32 is well supported, its maximum drive and file size is severely limited when compared to newer formats like NTFS and ExFAT:

Format To Fat32

* 1 petabyte is about 1 thousand terabytes
** 1 exabyte is about 1 million terabytes

Note that the maximum drive and file size of NTFS and ExFAT is so large that there's basically no limit. (But it would be nice to have a 128 PB USB drive, wouldn't it?)

On the other hand, FAT32's max file size of 4 GB is almost nothing now that phones can record 4K videos. Also, it's a little more difficult to format a drive larger than 32 GB to FAT32 on Windows 10.

These days, the only reason why you'd choose to format a drive to FAT32 is for compatibility. For example, if you need to boot up an old computer, maybe with a different operating system, and backup some of its files. Fruity loops windows. But you'd need to be sure that none of those files are greater than 4 GB.

If you're sure you want to go with FAT32, here's how to format a storage drive on Windows 10.

Important note: Before you format a drive, make sure that you backup all of your important files. In fact, make two backups, and keep one on a remote service like Google Drive or Dropbox.

Formatting a drive will delete all of the data that's currently on it.

How to use Windows File Explorer to format a USB drive to FAT32

A quick note about this method: it only works on USB flash drives that are less that 32 GB. If your USB drive is larger than 32 GB, check out one of the later methods.

With that out of the way, plug your USB drive into your computer and open Windows File Explorer.

Next, right-click on the drive on the left hand side of the File Explorer window and click 'Format':

In the window that pops up, ensure that 'FAT32' is selected. Also, feel free to rename the USB drive whatever you'd like:

You can leave the rest of the options alone. Just click start to format your drive.

Once it's done, your USB drive should be formatted to use the FAT32 file system.

To double check this, open File Explorer, right click on your USB drive, and click 'Properties'.

A window will pop up and you should see that the file system is now FAT32:

How to use Rufus to format a USB drive to FAT32

If your USB drive is larger than 32 GB, you'll need to use a third-party program like Rufus to format it.

There are lots of other programs that can format USB drives, but Rufus is really small and portable. This means you can stick Rufus right on a USB drive, plug it into any Windows computer, and format other drives on the go.

After you download Rufus, double click on the .exe file to start the application.

Make sure your USB drive is selected. Then, click the 'Boot selection' dropdown and select 'Non bootable':

Next, click the 'File system' dropdown and select 'FAT32'.

Also, feel free to change the name of your USB drive under 'Volume label':

Then, click the 'Start' button to format your drive. After a few seconds it'll be formatted to FAT32.

How to use PowerShell to format a USB drive to FAT32

While this method works with drives larger than 32 GB, it's really slow – even formatting a 32 GB drive can take up to an hour depending on your computer.

But, if you aren't able to use the previous two methods for some reason, this will work in a pinch.

First, click on the Windows Search Bar and type in 'powershell'. Then, click 'Run as administrator' to launch PowerShell with elevated privileges:

In the PowerShell terminal, enter the following command:

format /FS:FAT32 DRIVE_LETTER:

Use the File Explorer to double check your drive letter. My drive letter was D, so I entered format /FS:FAT32 D:.

Press Enter, make sure your USB drive is plugged in, and press the Enter key again to start the process:

Then go run some errands or something – it will take awhile.

Once the format command is finished, your drive should be formatted to FAT32.

Note that the maximum drive and file size of NTFS and ExFAT is so large that there's basically no limit. (But it would be nice to have a 128 PB USB drive, wouldn't it?)

On the other hand, FAT32's max file size of 4 GB is almost nothing now that phones can record 4K videos. Also, it's a little more difficult to format a drive larger than 32 GB to FAT32 on Windows 10.

These days, the only reason why you'd choose to format a drive to FAT32 is for compatibility. For example, if you need to boot up an old computer, maybe with a different operating system, and backup some of its files. Fruity loops windows. But you'd need to be sure that none of those files are greater than 4 GB.

If you're sure you want to go with FAT32, here's how to format a storage drive on Windows 10.

Important note: Before you format a drive, make sure that you backup all of your important files. In fact, make two backups, and keep one on a remote service like Google Drive or Dropbox.

Formatting a drive will delete all of the data that's currently on it.

How to use Windows File Explorer to format a USB drive to FAT32

A quick note about this method: it only works on USB flash drives that are less that 32 GB. If your USB drive is larger than 32 GB, check out one of the later methods.

With that out of the way, plug your USB drive into your computer and open Windows File Explorer.

Next, right-click on the drive on the left hand side of the File Explorer window and click 'Format':

In the window that pops up, ensure that 'FAT32' is selected. Also, feel free to rename the USB drive whatever you'd like:

You can leave the rest of the options alone. Just click start to format your drive.

Once it's done, your USB drive should be formatted to use the FAT32 file system.

To double check this, open File Explorer, right click on your USB drive, and click 'Properties'.

A window will pop up and you should see that the file system is now FAT32:

How to use Rufus to format a USB drive to FAT32

If your USB drive is larger than 32 GB, you'll need to use a third-party program like Rufus to format it.

There are lots of other programs that can format USB drives, but Rufus is really small and portable. This means you can stick Rufus right on a USB drive, plug it into any Windows computer, and format other drives on the go.

After you download Rufus, double click on the .exe file to start the application.

Make sure your USB drive is selected. Then, click the 'Boot selection' dropdown and select 'Non bootable':

Next, click the 'File system' dropdown and select 'FAT32'.

Also, feel free to change the name of your USB drive under 'Volume label':

Then, click the 'Start' button to format your drive. After a few seconds it'll be formatted to FAT32.

How to use PowerShell to format a USB drive to FAT32

While this method works with drives larger than 32 GB, it's really slow – even formatting a 32 GB drive can take up to an hour depending on your computer.

But, if you aren't able to use the previous two methods for some reason, this will work in a pinch.

First, click on the Windows Search Bar and type in 'powershell'. Then, click 'Run as administrator' to launch PowerShell with elevated privileges:

In the PowerShell terminal, enter the following command:

format /FS:FAT32 DRIVE_LETTER:

Use the File Explorer to double check your drive letter. My drive letter was D, so I entered format /FS:FAT32 D:.

Press Enter, make sure your USB drive is plugged in, and press the Enter key again to start the process:

Then go run some errands or something – it will take awhile.

Once the format command is finished, your drive should be formatted to FAT32.

In closing

Now you should be able to format a USB drive of any size to FAT32 on Windows 10. And with just a little modification, any of these methods can be used to format your drive to another file system like NTFS or ExFAT.

Now get out there and format all your USB drives. (But only after you backup everything important!)

Was this helpful? Is there a better method that you know of? Tweet at me and let me know how you format things on Windows 10.

Format Western Digital USB drives or WireFire hard disk drives to bring them to factory configurations as well as restore WD disk icon files

Restoring a hard drive to its original state can be quite a daunting job, especially if it has changed hands several times before coming into your possession. In case the unit in question happens to be an external Western Digital HDD, you might be lucky enough to come across a utility called WD FAT32 Formatter.

Only dedicated to a specific series of disk drives

This rather lightweight application is especially designed to restore the original FAT32 partition that the hard drive came out of the factory with. Roblox window 10. On the list of supported devices are WD800, WD1200, WD1600, WD2000, WD2500, WD3200, WD4000, WD7500 and WD10000.

For other types of device it might not function properly, so it's advisable to avoid using it unless your HDD is one of the models cited above. Also, you should note that the program recognizes SCSI, IDE and SATA hard drives.

Easilly accommodate with its features

Working with WD FAT32 Formatter is a really easy job, so even less experienced users should have no problems in operating it. As soon as the unit is detected and depending on its type, you will have at your disposal several options for the recovery.

Thus, you will be able to return the disk to the factory state, with the original FAT32 partition. Also, you can choose to restore the Western Digital disk icon and even give the volume a custom name (label).

Included in the package as well, you will find a utility that is able to clean from your system folders the BIN files used for restoring the HDD partition.

In conclusion

All things considered, if you need to quickly repair a Western Digital hard drive by formatting it so it returns to the original state, you are surely going to need WD FAT32 Formatter. Just check the compatibility list and choose the task you want to carry out. It is as simple as that!

Filed under

How To Format A Drive To Fat32

WD FAT32 Formatter 2.00

runs on:

Windows 7
Windows Vista
Windows XP
Windows 2K

file size:

550 KB

filename:

ExtFat32_v2.00.zip

main category:

System

developer:

visit homepage

top alternatives FREE

Format Flash Drive To Fat32

top alternatives PAID